How to use glass protective film

Glass protective film, a film attached to the surface of the glass, a PET film that can have the functions of heat insulation, heat insulation, anti-violet, anti-glare, decorative design, privacy protection, safety and explosion-proof type. The glass protective film can block 45-85% of the direct heat of the sun from entering the room in summer, and can reduce the calorific value by more than 30% in winter and evaporate; In addition, the glass protective film can withstand high temperatures above 500 degrees, which can reasonably avoid fire accidents and prevent damage to the body. A good quality glass protective film can block glare and 99% of ultraviolet light.

Instructions:

1. First clean the glass surface that must be pasted.

2. Spray a small amount of water containing detergent on the glass surface.

3. Tear off the fully transparent maintenance film on the reverse side of the electrostatic glass protective film, and immediately stick the electrostatic glass protective film on the glass.

4. Use a scale or a scraper or a pure cotton towel to scrape out the water and bubbles in it, that is, go ahead.

5. It is also possible to paste the electrostatic glass protective film on the glass in other places for continuous application.